3D Nanoweb of Zeolitic Imidazole Framework in Microfluidic System for Catalytic Applications
DOI: 10.1039/D0RE00004C, Paper
3D nanoweb-like zeolite imidazole framework (ZIF-8) as an efficient heterogeneous catalyst was structured inside a functionalized microfluidic channel by immobilizing the ZIF on 3D carbon nanotubes (CNTs) network across the...
The content of this RSS Feed (c) The Royal Society of Chemistry
3D flower-like molybdenum disulfide modified graphite felt as a positive material for vanadium redox flow batteries
DOI: 10.1039/D0RA02541K, Paper
The open flower-like structure facilitates vanadium ion transport. The capacity and efficiency of a battery using MoS2/GF are dramatically increased.
The content of this RSS Feed (c) The Royal Society of Chemistry
3D-printed microfluidic device with in-line amperometric detection that also enables multi-modal detection
DOI: 10.1039/D0AY00368A, Technical Note
A 3D-printed microfluidic device with amperometric detection employs a parallel-opposed electrode configuration, with threaded electrodes being in contact with the flow stream. This makes downstream detection of ATP via chemiluminescence possible.
The content of this RSS Feed (c) The Royal Society of Chemistry
3D bioprinting: modeling in vitro tissues and organs using tissue-specific bioinks / Dong-Woo Cho, Byoung Soo Kim, Jinah Jang, Ge Gao, Wonil Han, Narendra K. Singh
Online Resource
3D Printing and Biofabrication edited by Aleksandr Ovsianikov, James Yoo, Vladimir Mironov
Online Resource
3D architectures of single-crystalline complex oxides
DOI: 10.1039/D0MH00292E, Communication
We proposed 3D architectures of complex oxides as a way to derive novel properties: various 3D shapes were formed by self-shaped free-standing membranes, and curvature-induced polarization in an otherwise nonpolar material was observed.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry
3D printed microfluidic devices / special issue editors, Savas Tasoglu, Albert Folch
Barker Library - TJ853.4.M53 A133 2018
3D Interactive Globes Now Online: Spin Through an Archive of Globes from the 17th and 18th Century
Willem Janszoon Blaeu Celestial Globe 1602 No matter how accustomed we've grown over the centuries to flat maps of the world, they can never be perfectly accurate. Strictly speaking, no map can perfectly capture the territory it describes (an impossibility memorably fictionalized by Jorge Luis Borges in "On Exactitude in Science"), but there's a reason […]
3D Interactive Globes Now Online: Spin Through an Archive of Globes from the 17th and 18th Century is a post from: Open Culture. Follow us on Facebook, Twitter, and Google Plus, or get our Daily Email. And don't miss our big collections of Free Online Courses, Free Online Movies, Free eBooks, Free Audio Books, Free Foreign Language Lessons, and MOOCs.
3D-Nanosponge enabled segregation: a versatile approach for highly dispersed and high content functionalization of metal oxide species
DOI: 10.1039/D0QM00115E, Research Article
A general 3D nanosponge enabled strategy is developed to achieve simultaneously highly dispersed and high content functionalization of metal oxide species, ebabling a liabrary of functional nanostructures with great application potential.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry
3D texturing of the air–water interface by biomimetic self-assembly
DOI: 10.1039/C9NH00722A, Communication
The air–water interface can be textured according to the same self-assembly packing criteria that determine the wealth of 3D structures found in micellar and other amphiphilic meso-phases.
The content of this RSS Feed (c) The Royal Society of Chemistry
3D-Printed Egg Could Help Save Endangered Birds
Researchers have packed a 3D-printed egg with sensors to gather data about bird incubation so they can better raise endangered chicks.
3D-Printing a Custom Battle Damage Drop-O-Matic
Go inside Erik’s workshop to find out how he created a drop-o-matic device for the iPhone Battle Royale challenge using a 3D printer and a whole lot of creativity.
3D Printed Speakers Lit With LED
Check out these beautiful 3D printed LED speakers. You can't actually buy them, but LumiGeek is working on a board that will let you make you're own.
3D Printing's Future
Ceo of 3DSystems Abe Reichental and a couple of aspiring 3D engineers discuss the future place and capabilities of 3D Printing.
3D Web Design- The New Frontier for Web Design
This post explores the emerging popularity of 3D for creating highly interactive web sites.
3D imaging, analysis and applications / Nick Pears, Yonghuai Liu, Peter Bunting, editors
3ds Max projects : a detailed guide to modeling, texturing, rigging, animation and lighting
3D math primer for graphics and game development / Fletcher Dunn, Ian Parberry
3D spongy nanofiber structure Fe–NC catalysts built by a graphene regulated electrospinning method
DOI: 10.1039/D0CC01517B, Communication
A Fe–NC catalyst containing carbon nanotubes, mesopores and macropores with a measurable 3D framework structure was prepared by electrospinning.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry
3D bioprinting [Electronic book] : modeling in vitro tissues and organs using tissue-specific bioinks / Dong-Woo Cho, Byoung Soo Kim, Jinah Jang, Ge Gao, Wonil Han, Narendra K. Singh.
3D laser scans of Notre Dame Cathedral captured by late historian could be used to save the building
In 2015 architect Andrew Tallon -- who died last year of brain cancer at age 49 -- successfully captured every detail of Paris' Notre Dame cathedral using a mix of laser technology and digital photography.
3D-printed glasses startup Fitz is making custom protective eyewear for healthcare workers
A lot of startups have answered the call for more personal protective equipment (PPE) and other essentials to support healthcare workers in their efforts to curb the spread and impact of COVID-19. One of those is direct-to-consumer 3D-printed eyewear brand Fitz, which is employing its custom-fit glasses technology to build protective, prescription specs for front-line […]
3D-printed glasses startup Fitz is making custom protective eyewear for healthcare workers
A lot of startups have answered the call for more personal protective equipment (PPE) and other essentials to support healthcare workers in their efforts to curb the spread and impact of COVID-19. One of those is direct-to-consumer 3D-printed eyewear brand Fitz, which is employing its custom-fit glasses technology to build protective, prescription specs for front-line […]
3D-printed houses could become concrete reality
The technology has significant potential to shake up the construction sector
3D or not 3D?
This year 3D films look set to be bigger and more expensive than ever - with Werner Herzog's Cave for Forgotten Dreams just out in the UK, the latest Pirates of the Caribbean installment on its way, and offerings from Spielberg and Scorsese. But has the novelty worn off? Neville Hawcock, deputy arts editor, puts the question to Peter Buckingham of the BFI and Nigel Andrews, FT film critic.
Produced by Griselda Murray Brown
See acast.com/privacy for privacy and opt-out information.
3D Printed Drug-filled Dentures can Reduce Fungal Mouth Infections
Using 3-D printers to build dentures filled with microscopic capsules that periodically release Amphotericin B, an antifungal medication could help better
3d vlo
The Worst Things For Sale is Drew's blog. It updates every day. Subscribe to the Worst Things For Sale RSS!
3D-printed robotic bat wing holds new possibilities for small aircraft
Dig out those old da Vinci drawings of winged flying machines, as he was really on to something!
3D printing grows up, heals wounds by printing skin
Scientists have created a mobile bioprinter that when filled with a patient's cells, prints skin directly into a wound.
3D printed terracotta brick tower explores robotics in architecture (Video)
This digitally fabricated project revives a traditional material with new building technologies.
3D printed house displayed at Milan Design Week
Massimiliano Locatelli is writing a new language of design that reflects the new technology.
Formlabs receives FDA go-ahead to print BiPAP adapters
3D printing company Formlabs has received emergency use authorisation (EUA) from the U.S. Food and Drug Administration (FDA) to print bi-level positive airway pressure (BiPAP) adapters designed by Northwell Health, a New York healthcare provider.
3D Printed Microscope Costs as Little as $18
Researchers at the University of Bath in the UK have developed a 3D-printed microscope design, called OpenFlexure, which is open-source and can be assembled for as little as $18. More complex versions of the design are possible, and the microscope can incorporate full automation and a Raspberry Pi computer. The research team hopes that the […]
3D Printed Teeth with Enamel and Dentin Layer for Educating Dental Students in Crown Preparation
Commonly used model teeth are so far uniform in color and hardness. There is no discrimination between enamel and dentin part of a tooth. This condition makes it difficult to train a preparation technique, which is adapted to real tooth substance. The aim of this study was to design and establish a 3D printed tooth with different layers for enamel and dentin for education in crown preparation. A printable tooth with different layers for enamel and dentin was designed, and all 38 fourth-year dental students in the first clinical course in prosthodontics and 30 experienced dentists were trained during a voluntary hands-on course in 2019. Prior to the study, the students had used standard model teeth and real-teeth models in their preclinical education. They had experience in caries removal and preparation on real patients. The perceived benefits of the 3D printed tooth were evaluated by a questionnaire. All individuals in both groups completed the questionnaire, for a 100% response rate. The results showed that the printed tooth was given an overall mean grade of 2.3 (students) and 2.0 (experts) on a scale from 1=excellent to 5=poor. The difference in hardness between the dentin and enamel layer was given a mean of 2.4 (students and experts) and the difference in color a 1.7 (students) and 1.8 (experts). The tooth model with the prepared tooth illustrating an ideal preparation was graded 1.6 (students and experts). In this study, the students had the opportunity to learn a correct crown preparation on a printed tooth with different material properties for enamel and dentin. The learning effect with this tooth model was rated as good on the questionnaire by both students and expert dentists.
3D 'Printout' Device Keeps Very Ill Babies Breathing
Title: 3D 'Printout' Device Keeps Very Ill Babies Breathing
Category: Health News
Created: 4/29/2015 12:00:00 AM
Last Editorial Review: 4/30/2015 12:00:00 AM
3DEXPERIENCE, V5 and ENOVIAvpm support on Windows 10, Version1909
3DEXPERIENCE, V5 and ENOVIAvpm support on Windows 10, Version1909
3DEXPERIENCE R2017x FP.2016 Program Directory now available
3DEXPERIENCE R2017x FP.2016 Program Directory is now available online.
3DEXPERIENCE R2020x FD02 (FP.2014) Program Directory now available
3DEXPERIENCE R2020x FD02 (FP.2014) Program Directory now available